Embedded System Design with Zynq Devices for Newbie

赛灵思ZYNQ的SoC能够以最大的灵活性，重新配置一起提供每瓦最高性能。Zynq系列产品具有与7系列FPGA紧密结合的双核ARM Cortex A9处理器，可通过ARM设计流程和硬件加速实现更快的通信接口开发。Zynq设备有两种类别，即。Zynq-7000s系列FPGA适用于物联网相关应用等经济高效的应用，而Zynq 7000系列FPGA最适用于嵌入式视觉等高性能应用。Zynq7000s配备单核ARM，而Zynq 7000配备双核手臂。

本课程涵盖Popular Xilinx驱动程序的基础知识。UART，AXI定时器，UART16550，AXI GPIO，AXI BRAM等。本课程还说明了使用AXI中断控制器处理中断的方法。为了使硬件加速器与基于Zynq的设计完美结合，还提供了一些有关构建自定义AXI外围设备的示例。Zynq演示了软件和硬件调试，性能分析的基础知识，以简化性能测量。

本课程将为快速开始在Zynq FPGA器件上构建应用程序提供必要的基础，而无需具备该领域的经验。整个课程都是基于实验室的课程，主要侧重于构建处理简单外围设备（如GPIO），中间外围设备（如UART PS，AXI BRAM）和复杂外围设备（如AXI中断控制器，AXI计时器，GIC等）所需的构建技能。

MP4 | Video: h264, 1280×720 | Audio: AAC, 44.1 KHz, 2 Ch
Genre: eLearning | Language: English + srt | Duration: 63 lectures (7h 46m) | Size: 3 GB

All about Xil Drivers, Interrupts, Custom AXI Peripherals , Debugging and Profiling

What you’ll learn:
Embedded System Design flow using Zynq AP SoC
Software and Hardware Debugging
Fundamentals strategies to use Xilinx Drivers
Software Profiling
Interrupts
Development of C applications for Zynq Devices

Requirements
Understanding of Digital Electronics
Fundamentals of Computer Architecture

Description
Xilinx Zynq SoC’s are capable of providing maximum performance per watt along with maximum reconfiguration flexibility. Zynq family features Dual-Core ARM Cortex A9 processors tightly coupled with the 7-series FPGA to enable faster communication interfaces development with ARM Design flow and hardware acceleration. Zynq devices are available in two categories viz. Zynq-7000s family FPGA for the cost-effective application such as IoT related applications while Zynq 7000 family FPGA are best for high-performance applications such as Embedded Vision etc. The Zynq 7000s comes with Single core ARM while Zynq 7000 comes with Dual-Core ARM.

This course covers fundamentals of Popular Xilinx drivers viz. UART, AXI Timers, UART16550, AXI GPIO, AXI BRAM, etc. The course also illustrates the usage of the AXI interrupt controller for handling Interrupts. Also to felicitate incorporation of Hardware accelerators with Zynq based design few examples on building Custom AXI Peripherals are also included. Software and Hardware Debugging, Profiling fundamentals are demonstrated with Zynq to felicitate performance measurement.

This course will create the foundation necessary to quickly start building applications on Zynq FPGA devices without prior experience in this domain. The entire course is a Lab-based course with a major focussed on building skills necessary to handle simple peripherals such as GPIO, Intermediate Peripherals such as UART PS, AXI BRAM, and complex Peripherals such as AXI Interrupt Controller, AXI Timers, GIC etc.

Who this course is for
Anyone wish to build expertise in Xilinx Zynq APSOC and Vivado SDK Environment
Embedded System Design with FPGA Processors