Walker for UVI Falcon

Walker 是一款全面、灵活且易于使用的声音设计工具，可为您提供创建逼真的脚步声和运动声音所需的一切。Walker 建立在超过 25,000 个样本的库中，让您可以选择 3 对不同的麦克风对（放置在近处和远处）、6 种鞋子、14 种具有地面效果的地面和 8 种衣服的任意组合。在自动或手动模式下执行步骤，独立控制脚趾、脚跟和磨损时间，以与您的信号源完美同步，并调整衣服、鞋子、磨损、地板和地面效果的音量，如吱吱作响的木头、泥土、树叶和树枝，水等，以获得所需的确切声音。Walker 深度、灵活且组织良好，是后期设施和声音设计师不可或缺的工具。

深入

Walker 的设计是端到端的，旨在为专业使用需求提供严格的质量。在法国巴黎著名的 Technicolor Sound Stage 精心录制了超过 25,000 个样本的庞大库，并进行了编辑以实现精确可靠的回放。每个声音都使用 3 个匹配的麦克风对录制，这些麦克风对放置在近处和远处，暴露在 UI 中并可在 UI 中选择，包括 Schoeps CMC6（小振膜心形指向性）、Neumann U87（大振膜心形指向性）和 DPA 4006（全指向性）。
Walker 使用带有中央 HUD 预览的单个 UI 编辑器，显示当前加载的麦克风、鞋子、衣服和地面，而聚焦面板提供对麦克风、衣服、鞋子、地板、表面效果、步进模式、效果和高级设置的控制。每个编辑器面板都提供了许多用于自定义声音的选项：

Master
选择要监听的麦克风对，调整音量、音高和音高变化（以创建自然变化）、共振和动态范围。

Steps
使用距离旋钮在近端和远端定位的麦克风之间淡入淡出，添加混响，并启用 Link 以随着距离动态增加混响量。独立或自动设置步进速度和灵敏度，控制提鞋量并利用Auto-Scuff滑块增加步进过程中的磨损频率。

步进模式
在自动和手动模式之间切换，以实现简单的一键步进循环或手动控制步进声音的每个组成部分，包括；左脚和右脚独立的脚趾、脚跟和磨损。楼梯开关禁用脚跟声音组件以模拟踏上或下楼梯的声音。

鞋子 鞋子
发出的脚步声。从 6 种不同的鞋子类型中进行选择，包括；男士正装鞋、高跟鞋、工作靴、运动鞋、靴子和赤脚。选择鞋子吱吱声变化，调整步进音量、音量变化和音高。

地板 踩踏时地面
发出的声音。从 14 种不同的表面中进行选择，包括；木地板、油毡、瓷砖、混凝土、地毯、木材、泥土、砾石、草、森林、金属、泥土、沙子和雪。选择可变的地面效果，例如木地板吱吱作响、压碎植被和水坑，调整音量、音量变化和音高。

服装
脚步声和织物运动的脚步声。从牛仔裤、棉、皮革、金属皮革、涤纶、雨衣、合成纤维和粗花呢等 8 种材料选项中进行选择，并调节音量。

效果
3 效果包括带有高切和低切的可变 3 段均衡器、压缩器和基于 IR 的混响，可控制延迟时间、颜色和混音。

对左右脚脚趾和脚后跟声音的高级独立控制，具有关联或离散的增益和音高设置。

预设
Walker 包含大量现成的预设，可帮助加快您的工作流程。从模板中进行选择，例如 Alley – Trainers、Church – High Heels、Creaking Floor – Bare Feet、Upstairs Neighbors – Dress Shoes 等，然后选择后，可以根据需要调整设置，并可以保存为离散预设或使用 DAW会议。

Walker 是一款全面且完全可定制的软件解决方案，用于创建逼真的电影质量脚步声和脚步声，在方便且易于使用的软件包中提供完整的声音定制、智能自动化和卓越的音质。

AudioZ Exclusive | .ufs | 2.69 GB

Walker is a comprehensive, flexible and easy to use sound design tool that delivers everything you need to create realistic footstep and movement sounds. Built on a library of over 25,000 samples, Walker lets you choose any combination of 3 different mic pairs (placed near and far), 6 types of shoes, 14 ground surfaces with ground effects and 8 types of clothing. Perform steps in auto or manual modes with independent control over toe, heel and scuff timing to create perfect sync with your source, and adjust the volume of clothing, shoes, scuffing, floor and ground effects like creaking wood, dirt, leaves and branches, water and more to get the exact sound needed. Deep, flexible and well organized, Walker is an indispensable tool for post facilities and sound designers.

In-Depth

Walker was designed from end-to-end to provide an exacting quality for the demands of professional use. A massive library of over 25,000 samples was meticulously recorded at the prestigious Technicolor Sound Stage in Paris, France and edited for precise and reliable playback. Each sound was recorded with 3 matched mic pairs placed near and far, exposed and selectable within the UI, including Schoeps CMC6 (small-diaphragm cardioid), Neumann U87 (large-diaphragm cardioid) and DPA 4006 (omni-directional).
Walker utilizes a single UI editor with a central HUD preview showing the currently loaded mic, shoes, clothing and ground surface, while focused panels provide control over mics, clothing, shoes, floor, surface effects, step mode, effects and advanced settings. Each editor panel provides a number of options for customizing your sound:

Master
Select which mic pair to monitor, adjust the volume, pitch and pitch variance (to create natural variation), resonance and dynamic range.

Steps
Fade between the near and far positioned mics using the Distance knob, add reverb, and enable Link to dynamically increase the reverb amount with distance. Set the step speed and sensitivity independently or automatically, control the volume of shoe lift and utilize the Auto-Scuff slider to increase the frequency of scuffing during steps.

Step Mode
Switch between Automatic and Manual modes for simple one-tap step cycles or manual control over each component of the step sound including; toe, heel and scuff for both the left and right foot independently. A Stair switch disables the heel sound component to simulate the sound of stepping up or down a flight of stairs.

Shoes
The sound of steps made by the shoes. Select from 6 different shoe types including; men’s dress shoes, heels, work boots, trainers, boots and bare feet. Choose shoe squeak variations, adjust step volume, volume variation and pitch.

Floor
The sound of the ground surface made during steps. Select from 14 different surfaces including; wood floor, linoleum, tile, concrete, carpet, wood, dirt, gravel, grass, forest, metal, mud, sand and snow. Choose variable ground effects such as wood floor creaks, crushing vegetation and water puddles, adjust volume, volume variation and pitch.

Clothing
The sounds of legs brushing together and fabric movement during steps. Select from 8 material options including jeans, cotton, leather, leather with metal, polyester, raincoat, synthetic and tweed, and adjust volume.

Effects
3 effects include a variable 3-band EQ with high and low cut, compressor and IR-based reverb with control over delay time, color and mix.

Advanced
Independent control over left and right foot toe and heel sounds, with linked or discrete gain and pitch settings.

Presets
Walker includes a large selection of ready-made presets to help speed-up your workflow. Choose from templates such as Alley – Trainers, Church – High Heels, Creaking Floor – Bare Feet, Upstairs Neighbors – Dress Shoes etc., then once selected, settings can be tuned as needed and can be saved as either discrete presets or with your DAW session.

A comprehensive and fully-customizable software solution for creating realistic cinema-quality footsteps and feet foley, Walker provides complete sound customization, smart-automation and exceptional sound quality in a convenient and easy-to-use package.