AutoPIPE CONNECT Edition V12 Update 7

Bentley AutoPIPE是一个独立的计算机辅助工程 (CAE) 程序，用于在静态和动态负载条件下计算管道应力、法兰分析、管道支架设计以及设备管口负载分析。除了 24 种管道规范外，AutoPIPE 还结合了 ASME、英国标准、API、NEMA、ANSI、ASCE、AISC、UBC 和 WRC 指南和设计限制，以提供对整个系统的全面分析。

AutoPIPE 有三个版本：标准、高级和核。高级版提供了标准版不具备的多种高级分析功能，本章稍后将详细介绍。核版本提供了高级版本的所有功能，并添加了 ASME 1 类设计的所有功能。KHK2 附加选项也可用于 Advanced 或 Nuclear 版本，除了 Advanced 或 Nuclear 版本的所有功能外，还允许使用日本 KHK 2 级管道代码。AutoPIPE 是一个经过验证的、完善的计划，自 1986 年以来已开始商业化。AutoPIPE 严格的质量保证实践经受住了无数现场审核，使 AutoPIPE 成为少数获准用于核安全应用的基于 PC 的管道计划之一。

AutoPIPE 为您提供了专门用于管道应力分析的全面先进的软件工具。通过直观的建模环境和高级分析功能提高您的生产力并改进质量控制。通过与领先的工厂设计应用程序的互操作性，确保管道应力工程师、结构工程师和 CAD 设计师之间的高效工作流程。

Bentley 开发团队很高兴地宣布推出 AutoPIPE CONNECT Edition V12 Update 7 (12.07.00.346) 是一款设计和分析应用程序，用于计算静态和动态负载条件下的管道规范应力、负载和挠度，以满足最高核标准.

Bentley AutoPIPE CONNECT 版本 v12.7（商业版本 – v12.07.00.346）
以下概述确定了 AutoPIPE CONNECT 版本 12.07.00.346 版本中的新功能和增强功能。

管道规范
– 添加了 ASME B31.1 2020 – 电力管道。改进包括在默认情况下使用 ASME B31J 进行组件应力增强因子 (SIF) 和柔度计算，包括由于重量和合成力矩分解成输入/输出/扭转组件的轴向力，以及用于持续和偶尔应力计算的新 SIF，轴向在 SIF 设置为 1.0 的情况下添加的力用于弯曲/弯头/斜接，并使用新的 SIF 分解为输入/输出/扭转组件的合力，用于位移应力范围计算，并根据这些更改更新报告和选项设置。
报告
– 添加了仅将扩展组件报告 (.rpt) 生成为快速报告并将其显示在文本报告查看器中的功能。
– Microsoft Word 输入和输出报告经认证可用于商业用途。
分析
– 现在可以指定滑动/极限力/间隙支撑来模拟双线性刚度。
– 现在可以在顺时针/逆时针方向上指定旋转支撑间隙。
– 现在可以将钟摆效果应用于支撑，包括指定杆长度和角度的能力。钟摆效应是一种分析元素的行为，它在一端固定平移，但可以自由旋转（枢轴点），而另一端可以自由平移。
-支持的旋转设备（涡轮，压缩机，泵，用户定义的）喷嘴点已经从4增大到10的数量
一般
– AutoPIPE v12.7 模型现在可以保存为 v12.6 模型。
互操作性
– AutoPIPE v12.7 与 ProjectWise 365 兼容。
– PCF 转换器现在支持将 PCF 属性自定义映射到 AutoPIPE 属性。
注意
– 在 v12.7 版本中，一些与 DGN 文件格式相关的功能（包括 DGN 导出、iModel 导出和 iTwin Design Review）暂时不可用。此功能将在未来的版本中提供。如果您有任何问题，请联系 Bentley 技术支持。

The Bentley development team is pleased to announce the availability of AutoPIPE CONNECT Edition V12 Update 7 (12.07.00.346) is design and analysis application for calculating piping code stresses, loads, and defl ections under static and dynamic load conditions to meet the highest nuclear standards.

Bentley AutoPIPE CONNECT Edition v12.7 (Commercial Release – v12.07.00.346)
The following outline identifies new features and enhancements in the AutoPIPE CONNECT Edition version 12.07.00.346.

Piping Codes
– Added ASME B31.1 2020 – Power Piping. Improvements include the use of ASME B31J for component stress intensification factors (SIFs) and flexibility calculations by default, inclusion of axial force due to weight and resultant moment broken into in/out/torsional components with new SIFs for sustained and occasional stress calculations, axial force added with SIF set to 1.0 for bends/elbows/miters and resultant moment broken into in/out/torsional components with new SIFs for displacement stress range calculation, and report and option settings updated inline with these changes.
Reports
– Added the ability to generate an Extended Components Report (.rpt) as a Quick Report only and display it in the Text Report Viewer.
– Microsoft Word Input and Output reports are certified for commercial use.
Analysis
– Slip/ultimate force/gap Supports can now be specified to simulate bi-linear stiffness.
– Rotation Support gaps can now be specified in the clockwise/anti-clockwise direction.
– The pendulum effect can now be applied to supports, including the ability to specify the Rod length and angulation. The pendulum effect is the behavior of an analytical element which is fixed for translations at one end but free for rotations (pivot point), and the other end is free to translate.
– The number of supported Rotating Equipment (Turbine, Compressor, Pump, User-Defined) Nozzle points has been increased from 4 to 10.
General
– AutoPIPE v12.7 models can now be saved back as v12.6 models.
Interoperability
– AutoPIPE v12.7 is compatible with ProjectWise 365.
– The PCF Translator now supports custom mapping of PCF attributes to AutoPIPE properties.
Notes
– In the v12.7 release, some features related to the DGN file format including DGN export, iModel export, and iTwin Design Review are temporarily unavailable. This functionality will be made available in a future release. Please contact Bentley Technical Support if you have any questions.

Bentley AutoPIPE is a stand-alone computer aided engineering (CAE) program for calculation of piping stresses, flange analysis, pipe support design, and equipment nozzle loading analysis under static and dynamic loading conditions. In addition to 24 piping codes, AutoPIPE incorporates ASME, British Standard, API, NEMA, ANSI, ASCE, AISC, UBC, and WRC guidelines and design limits to provide a comprehensive analysis of the entire system.

There are three versions of AutoPIPE: Standard, Advanced, and Nuclear. The Advanced version offers several advanced analysis capabilities not available in the Standard version which are detailed later in this chapter. The Nuclear version offers all of the features of the Advanced version with the addition of all the features for ASME class 1 design. A KHK2 Add-On option is also available for the Advanced or Nuclear version that allows use of the Japanese KHK Level 2 piping code in addition to all the features of the Advanced or Nuclear version. AutoPIPE is a proven, well established program which has been commercially available since 1986. AutoPIPE’s rigorous quality assurance practices have withstood numerous on-site audits, making AutoPIPE one of the few PC based piping programs approved for use in nuclear safety applications.

AutoPIPE provides you with a comprehensive and advanced software tool specialized in pipe stress analysis. Increase your productivity and improve quality control with an intuitive modeling environment and advanced analysis capabilities. Ensure efficient workflows between pipe stress engineers, structural engineers, and CAD designers through interoperability with leading plant design applications.
Bentley Systems, Incorporated. is the global leader dedicated to providing architects, engineers, constructors, and owner-operators with comprehensive architecture and engineering software solutions for sustaining infrastructure. Founded in 1984, Bentley has nearly 3,000 colleagues in more than 45 countries, $500 million in annual revenues, and, since 2001, has invested more than $1 billion in research, development, and acquisitions.

Product: AutoPIPE
Version: CONNECT Edition V12 Update 7 (12.07.00.346)
Supported Architectures: x64
Website Home Page : http://www.bentley.com
Languages Supported: english
System Requirements: PC *
Size: 827.7 mb