Arduino for hobbyists

Arduino Uno是市场上最简单的微控制器之一，可以在电子行业起步。Arduino提供的丰富的库集允许开发许多应用程序，而无需具有微控制器或微处理器的先前经验。使用Uno的好处在于，几乎所有可以与Uno进行接口的设备都可以使用大量的资源和示例。与市场上提供的替代低成本处理器相比，这使其具有独特性。由于本课程是针对没有使用微控制器的经验的读者而设计的，因此有必要简化每个概念而又不丢失构建学习曲线所必需的细节。该课程涵盖了轻松开始在Arduino Uno上工作并建立功能以连接能够与Uno一起工作的任何传感器而没有任何困难的大多数概念。它包括有关Arduino IDE，Tinker CAD和Proteus的基础知识的讨论，以便在必要时通过对硬件的演示来加深理解。该课程涵盖输入设备的基础知识，例如不同类型的开关，键盘等；输出设备，例如不同类型的电动机，灯泡，LED矩阵，LCD，多路七段显示器等； PIR， TMP36，TEMT6000，LDR，Flex，MQ-2，超声波传感器，湿度传感器等 和Proteus在必要时通过对硬件的演示来加深了解。该课程涵盖输入设备的基础知识，例如不同类型的开关，键盘等；输出设备，例如不同类型的电动机，灯泡，LED矩阵，LCD，多路七段显示器等； PIR， TMP36，TEMT6000，LDR，Flex，MQ-2，超声波传感器，湿度传感器等 和Proteus在必要时通过对硬件的演示来加深了解。该课程涵盖输入设备的基础知识，例如不同类型的开关，键盘等；输出设备，例如不同类型的电动机，灯泡，LED矩阵，LCD，多路七段显示器等； PIR， TMP36，TEMT6000，LDR，Flex，MQ-2，超声波传感器，湿度传感器等

Step by Step Guide to Uno

What you’ll learn:
Fundamentals of Digital Input and Output Pins of Uno
Usage of types of switches, Keypad with Uno
Usage of Actuators such as different types of Motor, Light bulb
Usage of Output devices such as LCD, LED Matrix, Multiplexed Seven Segment Displays
Usage of Sensors such as LDR, Photodiode, TEMT6000, SR04, PIR, Flex, TMP36, DHT11 etc with Uno
Usage of Interrupts with Uno

Requirements
Fundamentals of Electronics

Description
Arduino Uno is one of the Simplest Microcontroller available in the Market to start a Career in the Electronics Industry. The rich set of libraries available with Arduino allows the development of numerous applications without prior experience of Microcontroller or Microprocessors. The good part about working with Uno is the huge amount of resources and examples available for almost all the devices that can be interfaced with Uno. This makes them unique in comparison with alternative low-cost processors available in the market. Since this course is targeted for the audience with no prior experience with Microcontroller, it becomes necessary to simplify every concept without losing details necessary to build a learning curve. The course covers most of the concepts require to easily start working on the Arduino Uno and build up capabilities to interface any sensor capable of working with Uno without any difficulties. It includes discussion on fundamentals of the Arduino IDE, Tinker CAD, and Proteus to build up an understanding with a demonstration on the hardware wherever necessary. The course covers fundamentals of the Input devices such as different types of Switches, Keypad, etc., Output devices such as Different types of Motors, Light bulb, Led Matrix, LCD’s, Multiplexed Seven Segment displays, etc., Sensors such as PIR, TMP36, TEMT6000, LDR, Flex, MQ-2, Ultrasonic Sensor, Humidity Sensors, etc.

Who this course is for
Anyone interested to learn about Arduino Uno or anyone planning to pursue career in Electronic Industry