BUW EMX (Expert Moldbase Extentions) 13.0.3.4 x64 for Creo 7.0

Creo Expert Moldbase Extension 包含来自所有领先供应商的定制的详细板坯和单个元素，同时考虑到该领域主要标准的要求。创建模型块时，Creo Expert Moldbase Extension 会自动生成装配图、规范和板图，同时考虑 ESKD 要求。

成形组件可以直接在 Creo Expert Moldbase Extension 中创建，也可以使用在 CreoTool Design 中创建的体量组件。

Creo Expert Moldbase Extension 提供专用的图形界面，其中包含已完成模型块设计和单个组件的示意性 2D 视图。同时，您可以创建和使用您的设计、组件、使用过的注塑机类型，输入您的供应商数据库。

模具部件主要参数的选择以二维方式进行。当需要指定放置特定组件的参数时，设计人员参考了三维结构。这种方法大大加快了模具设计过程。

通常，在板中制造带有孔、凹槽等的模具组件的成熟 3D 模型以自动模式形成。在这种情况下，所有孔和凹槽都是相关的 – 当您删除为其制作这些结构元素的组件时，它们也会被删除。当您更改组件的大小和位置时，这些几何图形会自动重建。

Creo Expert Moldbase Extension 自动放置紧固件，计算推动器和标记的长度，并沿零件轮廓创建切口。为了便于可视化，Creo Expert Moldbase Extension 允许您打开/关闭任何组件的显示。

File size: 423 MB
Creo Expert Moldbase Extension contains customized detailed slabs of slabs and individual elements from all leading suppliers, taking into account the requirements of the main standards in this area. When creating a model block, Creo Expert Moldbase Extension automatically generates an assembly drawing, specification and slab drawings, taking into account the ESKD requirements.

Shaping components can be created directly in Creo Expert Moldbase Extension, or you can use massing components created in CreoTool Design.

Creo Expert Moldbase Extension provides a dedicated graphical interface with a schematic 2D view of both finished model block designs and individual components. At the same time, you can create and use your designs, components, types of used injection molding machines, enter in the database of your suppliers.

The selection of the main parameters of the mold components is carried out in a two-dimensional mode. When it is necessary to specify the parameters for placing a particular component, the designer refers to the three-dimensional structure. This approach greatly speeds up the mold design process.

As a rule, full-fledged three-dimensional models of the mold assembly with holes, grooves, etc. made in the plates are formed in an automated mode. In this case, all holes and grooves are dependent – when you delete a component for which these structural elements were made, they are also deleted. When you change the size and location of components, these geometries are automatically rebuilt.

Creo Expert Moldbase Extension automatically places fasteners, calculates the length of pushers and marks, and creates cuts along the part’s contour. To facilitate visualization, Creo Expert Moldbase Extension allows you to turn on / off the display of any component.

Creo Expert Moldbase Extension implements an animation-based mold reveal mechanism with an analysis for the intersection of components. The following calculations are possible:

comparing the compressive force of the machine and the pressure generated inside the mold;
the force acting on the wedge during its movement (in the mechanism of the movable rod) at a given stroke;
wedge length;
the angle of the inclined pusher;
delays (with double opening of the model block);
the total design cost for making the mold.
Main advantages